USEFUL FUNCTIONS
46
a
Select a stitch.
b
Press to select the pivot setting.
→ The key appears as .
c
Place the fabric under the presser foot with
the needle at the starting point of the
stitching, and then press the “Start/Stop”
button. The machine will begin sewing.
d
Press the “Start/Stop” button to stop the
machine at the point where the sewing
direction changes.
→ The machine stops with the needle in the fabric, and
the presser foot is raised.
e
Rotate the fabric, and then press the “Start/
Stop” button.
→ The presser foot is automatically lowered, and
sewing continues.
Automatic Fabric Sensor System
The thickness of the fabric is automatically detected
and the presser foot pressure is automatically adjusted
with an internal sensor while sewing, so the fabric can
be fed smoothly. The fabric sensor system works
continuously while sewing. This function is useful for
sewing over thick seams (see page 41), or quilting (see
page 72).
a
Press .
→ The machine settings screen appears.
If you press the “Start/Stop” button to pause sewing,
then press it again to continue, reverse stitches (or
reinforcement stitches) will not be sewn.
To Next Page
Loading...
Need help?
General
