ENTERING STITCH DATA
128
ENTERING STITCH DATA
■ Key Functions
a This area displays the stitch being created.
b Displays the number of the present set point over the total number of points in the stitch.
c Displays the y-coordinate of over the x-coordinate of .
No. Display Key Name Explanation Page
d Grid direction key Press this key to change the direction of the grid sheet. 129
e Single/triple stitching key Press this key to select whether one or three stitches will be sewn
between two points.
129
f Point delete key Press this key to delete a selected point. 129
g Block move key Press this key to group points together and move them together. 131
h Insert key Press this key to insert new points on the stitch design. 132
i Set key Press this key to set a point on the stitch design. 129-130
j
Arrow keys
Use these keys to move over the display area.
129-130
k
Point-to-point key
Use these keys to move from point to point on the stitch, or to
the first or last point entered on the stitch.
130, 132
l Return key Press this key to exit the entering stitch data screen. 130
m Sewing key Press this key to sew the stitch being created. 130
To Next Page
Loading...
Need help?
General
