EasyManua.ls Logo

Brother NX-2000 - Fagoting

Brother NX-2000
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SEWING THE STITCHES
Utility Stitches
83
3
e
Pull the bobbin threads to create the desired
amount of gather, and then smooth the
gathers by ironing them.
f
Press or .
g
Sew between the straight stitches.
h
Pull out the straight stitch threads.
Fagoting
Stitching across an open seam is called fagoting. It is
used on blouses and children’s clothing.
a
Separate the two pieces of fabric by about
4 mm (approx. 3/16 inch), and baste them
onto thin paper.
a 4 mm
b Thin paper
c Basting
b
Press or , and then set the stitch width
to the maximum (7.0 mm).
c
Attach presser foot “J”, and then sew with the
presser foot centered between the two pieces
of fabric.
a Basting
d
When you are finished sewing, gently tear off
the paper.
Memo
For details on the stitches, refer to the “STITCH
SETTING CHART” at the end of this manual.
J
Memo
For details on the stitches, refer to the “STITCH
SETTING CHART” at the end of this manual.
Memo
This stitch is more decorative when thicker thread is
used.
a
b
c
a

Table of Contents

Related product manuals