ADJUSTING THE SCREEN
Appendix
141
6
c
Using the included touch pen, lightly touch
the center of each
×, in order from 1 to 5.
* If the buzzer sounds one time after you press
number 5, the operation is finished, and “SUCCESS”
appears on the screen.
If the buzzer sounds twice, there was an error. In
this case, repeat the steps above.
d
After making the necessary touch panel
adjustment, turn the machine off, then on
again.
Only use the included touch pen to touch the screen.
Do not use a mechanical pencil, screwdriver or any
other hard or sharp object. Do not apply a strong force
to the display, otherwise damage to the display may
result.
If you finish the touch panel adjustment and the screen
still does not respond, or if you cannot complete the
adjustment, contact your authorized dealer.
To Next Page
Loading...
