31
■ Setting your IP Address, Subnet Mask
and Gateway using BRAdmin Light
1
Click “Library”-“Printers”-“Brother”-“P-
touch Utilities”-“BRAdmin Light.jar”.
BRAdmin Light will search for new
devices automatically.
2
Double-click the unconfigured device.
The default password is “access”.
3
Choose “STATIC” for the “BOOT
Method”. Enter the IP Address, Subnet
Mask and Gateway, and then click [OK].
4
The address information will be saved to
the printer.
Note
● If you have a DHCP/BOOTP/RARP server
in your network, you don’t have to do the
following operation, as the print server
will automatically obtain its IP address.
PT9700PC9800PCN_US.book Page 31 Wednesday, October 7, 2009 11:58 AM
To Next Page
Loading...
