Brother PJ-822 - Enable or Disable Wi-Fi

Home > Network > Wireless Network Settings > Enable or Disable Wi-Fi
Enable or Disable Wi-Fi
Related Models: PJ-883
Follow these steps to enable or disable Wi-Fi or Bluetooth and Wi-Fi:
Press the Bluetooth and Wi-Fi button
to enable or disable the printer's Wi-Fi function.
When the Wi-Fi function is enabled, the Bluetooth and Wi-Fi indicator is lit or flashing in green / or
cyan / .
If the Bluetooth and Wi-Fi indicator is flashing in blue , press and hold the Bluetooth and Wi-Fi button
for about three seconds. The flashing color changes each time you press and hold the Bluetooth and Wi-Fi
button . Press Bluetooth and Wi-Fi button for three seconds to toggle between connection modes.
Related Information
• Wireless Network Settings
98