Home > Security > Use IEEE 802.1x Authentication for a Wireless Network > Configure IEEE 802.1x
Authentication for a Wireless Network Using Web Based Management (Web Browser)
Configure IEEE 802.1x Authentication for a Wireless Network Using
Web Based Management (Web Browser)
Related Models: PJ-883
• If you configure your printer using EAP-TLS authentication, you must install the client certificate issued
by a CA before you start configuration. Contact your network administrator about the client certificate. If
you have installed more than one certificate, we recommend writing down the certificate name you want to
use.
• Before you verify the server certificate, you must import the CA certificate issued by the CA that signed the
server certificate. Contact your network administrator or your Internet Service Provider (ISP) to confirm
whether a CA certificate import is necessary.
1. Start your web browser.
2. Type "https://printer's IP address" in your browser's address bar.
For example:
https://192.168.1.2
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as
"SharedPrinter" instead of the IP address.
For example:
https://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
For example:
https://brnxxxxxxxxxxxx
3. If required, type the password in the Login field, and then click Login.
The default password to manage this printer's settings is located in the battery cavity and marked "Pwd".
4. Go to the navigation menu, and then click Network.
Start from if the navigation menu is not shown on the left side of the screen.
5. Click Wireless > Wireless (Enterprise).
6. Configure the IEEE 802.1x authentication settings.
• If you are using EAP-TLS authentication, you must select the client certificate installed (shown with
certificate name) for verification from the Client Certificate drop-down list.
• If you select EAP-FAST, PEAP, EAP-TTLS, or EAP-TLS authentication, select the verification method
from the Server Certificate Verification drop-down list. Verify the server certificate using the CA
certificate, imported to the printer in advance, issued by the CA that signed the server certificate.
Select one of the following verification methods from the Server Certificate Verification drop-down list:
Option Description
No Verification The server certificate can always be trusted. The verification is not performed.
CA Cert. The verification method to check the CA reliability of the server certificate, using the
CA certificate issued by the CA that signed the server certificate.
132
To Next Page
Loading...
