Home > Appendix > Specifications
Specifications
>> Printing
>> Printer Size
>> Interface
>> Environment
>> Power Supply
>> Media Specification
>> Software
>> Compatible Operating Systems
Printing
Printing Technology Direct Thermal
Print Speed
1
Maximum: 3 ips
2
, 13.5 ppm
3
(76.2 mm/s
2
, 13.5 ppm
3
)
Print Resolution (PJ-822/PJ-862) 203 x 200 dpi
(PJ-823/PJ-863/PJ-883) 300 x 300 dpi
Printable Area (Cut Sheet) Configure with printer driver
(PJ-822
/PJ-862) min. 3.73" x 1.67"/94.7 mm x 42.2 mm - max. 8.16" x 99.67"/207.2
mm x 2531.4 mm
(PJ-823/PJ-863/PJ-883) min. 3.73" x 1.67"/94.8 mm x 42.3 mm - max. 8.21" x 99.67"/
208.6 mm x 2531.5 mm
Printer Size
Dimensions Approximately 10.04" (W) x 2.17" (D) x 1.18" (H) (Approximately 255 mm (W) x 55 mm
(D) x 30 mm (H))
Weight • Approximately 1.06 lb. (Approximately 480 g) (including dummy battery, excluding
paper)
•
Approximately 1.34 lb. (Approximately 610 g) (including the battery, excluding
paper)
Interface
USB USB Ver.2.0 (Full Speed) (Type C)
Printer class: Mass storage (16 MB of memory)
Bluetooth
(PJ-862/PJ-863/PJ-883
)
Bluetooth Ver.5.2 (Classic + LE)
SPP, OPP, HCRP (Bluetooth Classic), GATT (Bluetooth Low Energy)
Supported protocol: iAP
Wireless LAN (2.4 GHz)
(PJ-883)
IEEE 802.11 b/g/n (Infrastructure Mode)
IEEE 802.1
1 g/n (Wireless Direct Mode)
Wireless LAN (5 GHz)
(PJ-883)
IEEE 802.11 a/n (Infrastructure Mode)
1
These figures vary by environment. Our standard environment is as follows:
When printing with a USB connection using a new Rechargeable Li-ion Battery that is fully charged in an environment with a temperature of
73.4°F (23°C) using the JEITA J1 pattern.
2
When printing on A4-size paper.
3
When the Form Feed Mode setting is set to Fixed Page (paper size: A4) and printing continuously on roll paper.
184
To Next Page
Loading...
Need help?
General