Brother PJ-822 - Print Settings (Mac)

Home > Create and Print Documents Using Your Computer > Print a Document Using the Printer Driver
(Windows/Mac) > Print Settings (Mac)
Print Settings (Mac)
1
3
2
4
5
6
7
8
9
1. Density
Select the printing density.
2. 2-ply Mode
Specify the setting for using 2-ply paper.
3. Form Feed Mode
Specify how the printer responds to form feed commands received from any source.
4. Feed Margin
Specify the feed margin of the print job. Use this setting when Form Feed Mode is set to No Feed / Feed
Margin.
5. Print Speed
Select the printer’s printing speed. Reducing the printing speed improves the print quality.
Option Description
1.1 ips / 27 mm/s Select these options when you want to prioritize image
quality.
1.9 ips / 48 mm/s
2.7 ips / 70 mm/s
3.5 ips / 90 mm/s This setting balances speed and image quality. Select
this option when printing standard documents.
Fast (Draft Quality) Speed priority mode. Select this option when printing
documents containing bold text.
Fast (Line Conversion) Speed priority mode. Select this option when printing
documents with ruled pages or bold text.
6. Dash Line Print
Select to print dash lines between pages, which is useful when printing on roll paper. Set Form Feed Mode
to Fixed Page and paper type to Roll, and then select Enable. Note that dash lines are printed on the paper;
they are not punched into the paper.
7. Halftone
Select a halftone processing method.
8. Negative Printing
Select to print with black and white inverted.
61