9. Roll Printer Case
Specify the setting for using the optional roll printer case. Depending on the selected option, you can adjust
the feed value or amount of paper retraction for the roll printer case.
Option Description
Printer Default Select this option when using the printer settings as-is.
None Select this option when not using the roll printer case.
PA-RC-001 Select this option when using the anti-curl mechanism
while using the roll printer case.
PA-RC-001 (Without Anti Curl) Select this option when not using the anti-curl
mechanism while using the roll printer case.
PA-RC-001 (Short Feed) Using the roll printer case with paper passed through
the anti-curl mechanism causes the paper to have
pressure marks. Use this option to make sure the
pressure marks are not printed.
Related Information
• Print a Document Using the Printer Driver (Windows/Mac)
62
To Next Page
Loading...
