Home > Set Up Your Printer > Connect the Printer to External Power
Connect the Printer to External Power
Connecting the printer to a power supply while the printer is off automatically turns the printer on for a
system check. If Auto Power On is set to Off, the printer turns off after the system check.
>> Connect to an AC Power Outlet (Optional)
>> Connect to a DC Power Outlet (Optional)
>> Connect to an AC Power Outlet Using the AC Adapter for USB Type-C (Optional)
Connect to an AC Power Outlet (Optional)
Connect the printer to a nearby AC power
outlet to power the printer or charge the Rechargeable Li-ion Battery
using AC power
. When purchasing the printer
, purchase the correct AC Adapter and AC power cord for the
region where the printer will be used.
The AC Adapter and AC power cord are optional accessories.
1. Connect the AC Adapter (a) to the printer.
2. Connect the AC power cord (b) to the AC Adapter.
3. Connect the AC power cord to a nearby AC power outlet (100 V AC - 240 V AC, 50/60 Hz).
a. AC Adapter
b. AC power cord
Connect to a DC Power Outlet (Optional)
Connect the printer to your vehicle’
s 12 V DC power
outlet (cigarette lighter or similar) to charge the
Rechargeable Li-ion Battery
.
• The Car Adapter is an optional accessory.
• The voltage supplied by a vehicle may fluctuate, and printing speed may vary.
• The Car Adapter plug is not compatible with other outlets that are not the 12 V cigarette type.
1. Connect the Car Adapter to the vehicle’s 12 V DC power outlet.
23
To Next Page
Loading...
