Clean the Printer’s Surface
Wipe the printer's surface with a dry cloth.
IMPORTANT
- Do not use a wet cloth or allow water to enter the printer.
- Do not use benzene, alcohol, paint thinner, or cleaners that are abrasive, alkaline, or acidic. Such
cleaners may damage the printer’s surface.
Clear a Paper Jam
1. Carefully lift the Release Cover up to open it.
2. Carefully pull the paper out of the printer in either direction.
3. Close the Release Cover.
4. Insert paper and print again.
Related Information
• Routine Maintenance
169
To Next Page
Loading...
