7. Click OK.
8. Complete your print operation.
The Data indicator flashes in green
to indicate that the printer is receiving data.
• If paper is loaded and the Data indicator remains green without flashing, the printer has not
received enough data to print an entire page. Turn the printer off, and then turn it on again.
• The paper can be loaded after the print job has been sent. If the paper is skewed after the printer pulls it
into the starting position, open the Release Cover completely, remove the paper, and then close the
cover and load the paper again.
• To print a JPEG image without using the printer driver, see Related Topics: Notes on Printing Image
Data without Using the Printer Driver.
Making Prints Lighter or Darker
You can make prints lighter or darker by adjusting the print density setting in the printer driver’s dialog box, or in
the Printer Setting Tool.
For more information, see Related Topics: Change Printer Settings Using the Printer Setting Tool (Mac).
Related Information
• Create and Print Documents Using Your Computer
• Print Settings (Windows)
• Print Settings (Mac)
Related Topics:
• Notes on Printing Image Data without Using the Printer Driver
• Change Printer Settings Using the Printer Setting Tool (Windows)
• Change Printer Settings Using the Printer Setting Tool (Mac)
56
To Next Page
Loading...
