MESSAGES IN MULTIFUNCTION GAUGE
Important information about vehicle
condition is displayed on the multifunc-
tion gauge. When starting the engine,
always look at the gauge for any spe-
cial messages.
Important information messages can
also be displayed temporarily to assist
indicator lamps.
rmr2011-079-005_a
1. Message
After a moment, the message disap-
pearsandisreplacedbyaniconinthe
trip odometer area.
rmr2011-079-006_a
1. Icon
If a fault is displayed, press the MODE
button to skip the error message.
NOTE: Skipped error messages will
still be displayed in the lower section
of the multifunction gauge and will be
brought back to the main screen for a
period of 60 seconds when the vehicle
speed is below 3 km/h (2 MPH)
If a problem persists, go to an autho-
rized Can-Am roadster dealer.
148
______________
To Next Page
Loading...
