Bruker BSMS/2 User Manual

BVT
44 Bruker
BSMS/2 Mainframe Version 001
Pull the BSMS/2 approximately 15cm (6 inch) out of the
cabinet.
Make sure that the mains switch is turned off and the
mains cable is plugged out !
Then remove the back pannel.
Plug in the BVT and fix the screws.
The BVT connected with the air tubes.

Bruker BSMS/2 Specifications

General

Brand	Bruker
Model	BSMS/2
Category	Laboratory Equipment
Language	English