Technical data
and startup
6.6 Assembly information
6.6.1 Installation position
Even if the device has high IP protection, install it well above the fording depth of the vehicle. Ensure for the
installation positioning that the connection side is tilted downwards. This prevents water accumulation on the cable
sealing which could result in water leaking into the housing.
6.6.2 Fixing (as in example DMC524)
Recommended screw types:
Cylinder screw ISO 4762 - M6 x 30 - 8.8
or
Hexagon screw ISO 4017 - M6 x 30 - 8.8
Torque for M6 x 30 screws: 10 Nm +/-0.5
1. Screw fixing points (4 pieces)
To Next Page
Loading...