Technical data
and startup
10.3 Fix CVI problems
Error active, cannot be removed
With an incompatible or faulty CAN matrix, it is
possible that the errors displayed in the section (5)
are incomplete!
Analyse and remove errors in the manual
DMC5_ErrorsAndWarnings.pdf.
The limitation value is set too high or too low.
Check limitation value.
Check default values, see manual
Param operation.pdf
CAN connection cannot be activated
Faults in the connection or wiring
Check wiring and CAN / USB adapter.
Check all connections on inverter
Carry out error analysis with the
DMC5_ErrorsAndWarnings.pdf
To Next Page
Loading...
