5
MAIN SCREEN
The main screen is where most interactions will take place. Touch anywhere on the
Home screen to arrive at the main screen.
System Mode
S Once in the main screen,
S To access your system mode touch the MODE label located in the upper
right of the control.
S The drop--down menu will allow you to choose between AUTO, HEAT,
COOL, FAN ONLY and OFF, depending on the equipment installed in
your system.
S If OFF is selected your system will not control temperatures, humidity,
or fan.
S If AUTO is selected, the Evolution Connex Control automatically
switches between heating and cooling to maintain your comfort during
transitional seasons.
NOTE: To save energy, AUTO mode is intended to switch between Heating and
Cooling modes from day to day, not within an hour, for example, time frame. The
Evolution
®
Zoning System is not designed to satisfy simultaneous Heat and Cool
demands in different zones, in an effort to limit the effect of competing Heat/Cool
zones on excess energy usage.
S If HEAT is selected then the Evolution Connex Control operates only the
heating system.
S If COOL is selected then the Evolution Connex Control operates only
the cooling system.
S If FAN ONLY is selected, then the Evolution Connex Control operates
the indoor fan but heating, cooling, humidification or dehumidification
will not take place.
To Next Page
Loading...
Need help?
General
