55
UTILITY DEMAND EVENT RESPONSE SETUP
This section is only applicable if your utility company is running a demand
response or price response program in which you have agreed to participate.
Contact your local electrical utility company for information about programs in
your area.
NOTE: If you wish to participate with your electrical utility company, a service
person or Utility representative must enable the utility event interface.
A14285
Utility Event
Your utility may send price response or demand response events to your Wi--Fi
enabled Evolution Connex Control. When a price response or demand response
event is received, your temperature set points will be automatically adjusted
depending on the utility event setup settings that you have selected.
When a utility event is in progress…
S The temperature set points will be automatically adjusted depending on
the utility event setup. The adjusted heating and cooling temperatures
will be displayed in green on the main screen along with a “utility
event” message.
S A utility event icon will appear on the home screen. Pressing the icon or
manually adjusting the heating and cooling set points will display the
To Next Page
Loading...
Need help?
General
