15
Home Comfort Profile Fresh Air Control
S If a ventilator is installed in your home, select the amount of fresh air to
circulate during heating mode by touching HEATING FRESH AIR.
NOTE: This option may not be available with the ERVXXNVA ventilator due to
its simplified control design.
A14246
d You will have the option of choosing among AUTO, MANUAL,or
OFF.
NOTE: This option may not be available with the ERVXXNVA ventilator due to
its simplified control design.
d The AUTO setting will allow the user to choose the maximum fresh
air that the ventilator will provide. Selections are Low, Medium or
High. In Auto, the ventilator will run continuously, unless the out-
door temperature approaches 0F or 100F. At those temperatures, it
will turn off.
d The MANUAL setting allows you to select the percentage of fresh
air to supply to your home.
d Use the Up (Y) and Down (B) buttons to set the desired ventilator
speed level.
d Press SAVE when finished, or CANCEL to discard any changes.
To Next Page
Loading...
Need help?
General
