36
BSS Temperature Probe
17.0 BSS Temperature Probe
TCS-804: To enable the temperature corrected delay time feature of the TCS-
80X series to be automatically implemented, there is an external temperature
measuring probe available as an additional option.
It is supplied mounted into an standard 3 pin XLR connector and comes
complete with an XLR to RTS jack convertor. The probe plugs into the RTS
jack socket on the TCS-804 rear panel. Should you wish to mount the probe
some distance away from the unit, use a standard 3 pin balanced XLR cable
as an extension.
Remember that control of a number of TCS-80X units from the one
temperature probe can be done via the MIDI control interface.
To Next Page
Loading...