BST ekr CON 600 net Installation And Operating Manual

10
Maintenance and Cleaning
36/39 ekr CON 600, ekr CON 600 net – Application with Wide Array Edge Sensors
10.2 Maintenance Table
The following table gives you an overview of the necessary main-
tenance tasks and intervals.
The maintenance intervals specified are reference values. With
particularly intensive stress / soiling, the intervals must be reduced.
Carry out the respective maintenance and cleaning as described in
the following chapters.
Maintenance Interval Maintenance tasks to be carried out
Weekly Clean the housing of the sensors.
10.3 Maintenance and Cleaning work
10.3.1 Cleaning the Wide Array Edge Sensor Housing
The wide array edge sensors are maintenance-free.
Cleaning the housing
►
Clean using a dry, clean and soft cloth.
►
Use a commercially available liquid cleaner in event of intensive
soiling.
Cleaning the scanning area
►
Clean carefully using a dry, clean and soft cloth (e.g. glasses
wipe).
►
Use a commercially available liquid cleaner in event of intensive
soiling.
►
Perform the material setup after cleaning.

BST ekr CON 600 net Specifications

General

Brand	BST
Model	ekr CON 600 net
Category	Controller
Language	English