Maintenance and Cleaning
10
ekr CON 600, ekr CON 600 net – Application with Wide Array Edge Sensors 35/39
10 Maintenance and Cleaning
Maintenance and cleaning work must be carried out as
described in the following. Otherwise increased wear and
system failures may occur.
Claims on the warranty and claims for damage are invalid if main-
tenance and cleaning work have not been carried out or not been
carried out correctly.
10.1 Safety Instructions
DANGER
Danger of death caused by the machine starting up!
Parts of your body could be crushed, cut, drawn in or hit.
►
Switch off the machine completely and secure it against it being
switched back on.
DANGER
Danger of death from electric shock!
Life threatening injuries caused by incomplete switching off or re-
sidual current.
►
Electrically isolate the controller.
►
Secure the power supply against being switched back on.
►
Check that the unit is voltage-free.
►
Earth the controller.
►
Cover or fence off any adjacent parts that are still live.
WARNING
Risk of injury and material damage caused by incorrect mainten-
ance / cleaning!
►
Have the maintenance and cleaning carried out only by
qualified personnel that have been instructed by BST service
personnel or authorized personnel.
►
Carry out the maintenance and cleaning as described in the
following chapters.
►
With particularly intensive stress / soiling, reduce the specified
maintenance intervals.
NOTICE
Damage to the components caused by solvents!
Cleaning agents containing solvents damage the surfaces of the
system components.
►
Never use cleaning agents containing solvents, not even with
intensive soiling, unless the respective cleaning agent is
explicitly listed in the instructions.
►
Follow the cleaning instructions.
To Next Page
Loading...
Need help?
General
