BT 1010 User Manual

Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
30
To redial a number
From standby:
1. Press to access the redial list.
2. Press or to scroll and display the number you want.
3. Press to dial the number.
Via the menu:
1. Press Menu to access the menu.
2. Press or to scroll and display CALLS LISTS and press
OK .
3. RECEIVED CALLS is displayed. Press or
until
DIALLED CALLS is displayed and press OK
to display the redial list.
4. Press or to scroll and display the number you want.
5. Press to dial the number.
If a name/number match is found in
the phonebook the name will be
displayed instead of the number.
If you have dialled the same number
on more than one occasion, the call
will appear only once in the redial list.
Each redial number can be up to a
maximum of 20 digits long. Numbers
exceeding 20 digits will not be stored.
Redial names can be up to 16
characters.
When you are at the top of the list,
pressing takes you to the oldest
call and when at the bottom, pressing
takes you to the newest.
If there are no numbers saved in the
redial list
EMPTY will be displayed.
Using the phone
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 30

BT 1010 Specifications

General

Brand	BT
Model	1010
Category	Cordless Telephone
Language	English