Enter the login information: username admin;
password admin
Click
CONFIGURATION
Click
CONFIGURE
in the horizontal menu on the right
Enter the current time and date
Click
APPLY
.
5. Your Hub is now set to the correct time. The Hub Phone will
now receive the time during the next incoming call.
Alarm
You can use your BT Hub Phone 1010 handset as an alarm
clock. You can set a single alarm or set an alarm to sound at
the same time each day. When an alarm is set the icon will
be displayed when in standby mode.
To set an alarm
1.
Press Menu to access the menu.
2. Press or to scroll and display
TIME SETTINGS
and
press
OK .
Remember to ensure your time is set
correctly in the hub as per the
instructions in section,'Setting
the time'.
Time settings
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
59
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 59
To Next Page
Loading...
Need help?
General
