Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
53
5. Press or to select
ON
or
OFF
then press OK .
SAVED
is displayed.
6. Press Back repeatedly to return to the idle screen.
To switch out of range beeps On/Off
During a call, if the handset moves out of communication
range with the base you will hear a warning beep to alert you
to move closer to the base for improved reception and to
avoid being disconnected.
1. Press Menu to access the menu.
2. Press or to scroll and display
HANDSET
and
press
OK .
3. Press or until
BEEP TONES
is displayed and
press
OK .
4. Press or until
OUT OF RANGE
is displayed and press
OK .
5. Press or to select
ON
or
OFF
then press OK .
SAVED
is displayed.
6. Press Back repeatedly to return to the idle screen.
Handset settings
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 53
To Next Page
Loading...
