BT 1010 User Manual

Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
If an incoming call is received whilst
you are on an internal call you hear
Call W
aiting beeps. If you end the
internal call, all the handsets will then
start to ring and show the Caller
Display for the incoming call.
64
Internal calls
Making internal calls
You can make internal calls between two BT Hub phone handsets
that are registered to your hub. This can only occur if there are no
other calls in progress on additional handsets. Once an internal
call is in progress all other handsets will show,
MAXIMUM NUMBER
OF CALLS IN PROGRESS
.
1. Press INT.
2. Enter the other handset number using the keypad
(e.g. ). The called handset will ring and show the calling
handset’s number.
If there is no response, press to end the call at your
handset.
Receiving internal calls
1.
When the handset rings, press to answer.
2. Press to end the call.
Using additional handsets
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 64

BT 1010 Specifications

General

Brand	BT
Model	1010
Category	Cordless Telephone
Language	English