BT 1010 User Manual

Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
51
Beep tones
Your BT Hub Phone 1010 handset emits beeps to alert you to
certain situations. You can set the handset to beep:
•
To beep as confirmation each time a handset button is
pressed (key beeps).
•
If the battery is low.
•
If you go out of range of the base.
These beeps can be switched ON or OFF.
To switch key beeps On/Off
1.
Press Menu to access the menu.
2. Press or to scroll and display HANDSET and
press
OK .
3. Press or until BEEP TONES is displayed and
press
OK .
However, beeps which confirm
settings cannot be switched off.
The default setting for all key beeps is
ON.
Handset settings
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 51

BT 1010 Specifications

General

Brand	BT
Model	1010
Category	Cordless Telephone
Language	English