Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
44
Call Waiting
You will hear a beep every 5 seconds if an incoming call
arrives while you are already on the phone. This beep is not
audible to the person you are speaking to. The second caller’s
number (or name if a phonebook match is found) will appear
on the handset display.
Any other Hub handsets will also ring for incoming calls.
Speak to a second caller
1.
Press to answer the second call and put your current
caller on hold. Press again to return to your first caller
and to switch between both callers.
Or
2. If you want to end the current call and pick up the waiting
call, press . The handset will ring. Press again to
connect to the waiting caller.
The second caller is only charged from
the second you answer
, not while they
are waiting to be connected.
Caller Display and the calls list
Call Waiting is set automatically, you
can turn this feature off by using
#43#. When you turn Call Waiting off
you will hear a beep.
Any other handsets will ring if the
maximum number of calls isn’t already
in progress.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 44
To Next Page
Loading...
Need help?
General
