BT 1010 - Hub Base Settings; Reset Your BT Hub Phone 1010 to the Default Settings; To Change the System PIN Code

Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Reset your BT Hub Phone 1010 to the default settings
1.
Press Menu to access the menu.
2. Press or to scroll and display BASE SETTINGS and
press
OK .
3. Press or until DEFAULT SETTINGS is displayed and
press
OK .
4. Enter the PIN code and press to confirm.
System PIN
Your BT Hub Phone 1010 has a system PIN code which you
will need to change various settings. The default code is
0000. You may want to change this to prevent unauthorised
changes to your settings.
To change the System PIN code
1.
Press Menu to access the menu.
2. Press or to scroll and display BASE SETTINGS and
press
OK .
To exit and return to the idle display at
any time, press Back repeatedly.
56
Hub base settings
The default setting is 0000.
56
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 56