BT 1010 - Page 57

3. Press or until SYSTEM PIN is displayed and press OK
.
4. ENTER OLD PIN is displayed. Enter your old 4 digit PIN then
press
OK .
5. ENTER NEW PIN is displayed. Enter a new 4 digit PIN and
press
OK . CONFIRM NEW PIN is displayed.
6. Re-enter your new 4 digit PIN again for verification then
press
OK . SYSTEM PIN CHANGED is displayed.
7. Press Back repeatedly to return to standby.
Hub base settings
As you enter the PIN number, each
digit is displayed as
*
for security
reasons.
Press
Clear if you enter an
incorrect digit.
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
57
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 57