Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
5. On the handset:
• Screen prompts on the handset will help guide you through
the registration process. It’s easy!.
PLEASE REGISTER YOUR
HANDSET TO THE BT HOME HUB
will appear on screen.
• Press OK. You then need to press and hold the wireless button
on the back of the Hub for 3 seconds (the phone light on the
Hub will then flash) then you can release the button.
• Press OK and place the handset in the charger connected to
the Hub. Once the handset and charger cradle are in the Hub,
REGISTERING HANDSETS
,
PLEASE WAIT
appears on screen. DON'T
REMOVE HANDSET UNTIL YOU GET A CONFIRMATION MESSAGE.
Getting started 9
Battery performance
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, giving the handset less
talk/standby time.
Eventually they will need to be
replaced. Please ensure you use the
same mAh rating for battery
replacement to the batteries that
were provided when you received the
handset.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 9
To Next Page
Loading...
