29
If you experience any problems, please call the Helpline on 0870 242 6652*
Using the answering machine
Ready to record
The answering machine is pre-set to
ON, so it’s ready to record messages as
soon as the base is plugged in.
(Remember to charge the handset for
at least 24 hours first).
Your BT Graphite 1500 answering machine uses voice prompts
to guide you simply through its operation.
You can operate your answering machine from the base and
remotely, from any other Touchtone
®
telephone.
Before first using your answering machine you should set the
correct day and time. If you have not done this already when
you set up your phone, please see page 9.
Switching the answering machine on/off
1. Use the button to switch the answering machine on or
off. By pressing you can scroll around the 3 options:
Answer only, Answer off and Answer and record.
Listening to your messages
When you have messages recorded on your answering
machine, the number of messages will be displayed on the
base message counter.
Play messages
1. Press New messages are played first. Your new messages
are played back, the oldest message first. At the start of each
message the day and time of recording is announced. After the
last message, the machine announces “End of new messages.”
During playback, the answering
machine message indicat
or
displays the number of the message,
e.g. 01, 02, 03 etc.
See page 31-32 for information on
outgoing messages for Answer only
and Answer and record.
To Next Page
Loading...
Need help?
General
