12 – 2 Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D © BT
Drive wheel 3530
Replacing the drive wheel
T code Valid from serial no. Date Order no.
841×842×843 6061850- 2012-08-30 258946-120
Installing the drive wheel on the truck
1. Fit the drive wheel.
2. Fasten the screws and washers.
3. Tighten the screws crosswise - tightening torque:81 ± 19 Nm
4. Remove the trestles and lower the truck to the ground.
5. Connect the battery.
Step 1
Step 2
Step 3
Step 4
Step 5
× n
s mm
Step 3: s = 17, n = 5
M
v
= 81Nm
https://www.besttruckmanuals.com/
To Next Page
Loading...
