Hydraulic system 6000
Hydraulic connections 6230
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 17 – 7
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
Dismantling the quick change connector
1. Remove the assembly stop (with the aid of a screwdriver or
similar tool).
2. Push the male fitting all the way into the female fitting.
3. Pull the male fitting out of the female fitting.
4. Refit the assembly stop on the male fitting.
5. Place protective plugs on the valve and hose.
https://www.besttruckmanuals.com/
To Next Page
Loading...
