Instructions for disposal
General
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 27 – 1
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
27 – Instructions for disposal
27.1 General
The disposal instructions were developed to support our company's
objective of protecting the environment. By recycling materials,
resources can be utilised more efficiently, while reducing emissions.
The following instructions specify the proper sorting category of the
materials used in the various truck components. To achieve optimum
sorting, all components should be disassembled to a level
corresponding to the sorting categories.
27.2 Marking of plastics
27.2.1 General marking of products and
packaging
Markings on plastics consist of three arrows, a number and usually also
a designation of the plastic material used. The picture shows the
marking for polypropylene.
• 01: PET – Polyethylene terephthalate
• 02: PE-HD – Polyethylene with high density
• 03: PVC – Polyvinyl chloride
• 04: PE-LD – Polyethylene with low density
• 05: PP – Polypropylene (see picture)
• 06: PS – Polystyrene
• 07: O – Other
https://www.besttruckmanuals.com/
To Next Page
Loading...
