Maintenance
General
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 5 – 1
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
5 – Maintenance
5.1 General
This chapter contains a general periodic maintenance schedule and a
more detailed description of the maintenance to be carried out.
5.2 Service intervals
The service intervals are for guidance only and do not need to be
strictly followed. The service technician should adapt these to local
requirements, however, it is important that the intervals coincide with
the minimum requirements of the truck manufacturer.
The service intervals are based on operating hours and can be adapted
to most standard 8-hour shifts. The following operating hours have
been used when calculating the intervals:
Daytime: 08.00-17.00 (20 h/week)
2 shifts: 06.00-14.00, 14.00-22.00 (40 h/week)
3 shifts: 06.00-14.00, 14.00-22.00, 22.00-06.00 (60 h/week)
Make sure the truck undergoes regular maintenance at intervals of 750
operating hours. The safety, efficiency and expected service life of the
truck depend on the service and maintenance the truck receives.
Following completed service intervention, test drive the truck and
perform an operational inspection. See the Installation chapter under
the heading Function and safety checks.
For service and repairs, only use spare parts approved by truck
manufacturer.
5.3 Maintenance schedule
Service maintenance should be performed in intervals of 750 operating
hours or every 12 months, whichever occurs first.
The order in the maintenance schedule is not optimal for the working
order; it is simply sorted according to the C codes.
https://www.besttruckmanuals.com/
To Next Page
Loading...
