BTEK DD 700 - Disassembling Components; Disassembling Support

10
INSTALLATION MANUAL DD700
2 DISASSEMBLING COMPONENTS
2.1 Disassembling support (only for stainless steel version)
Figure 2.1-1 – Disassembling support
Referring to the previous figure, proceed as follows:

Unscrew the fixing knobs (ref. 1).

Remove the support (ref. 2 wall-mounted version) (ref. 3 tabletop version).

Recover the washers (ref. 4) between the support and terminal.
2
3
1
4