Buderus Logamatic 4323 User Manual

Extended functions
7
Logamatic 4323 - Subject to technical modifications.
30
7.5 Setting the date and time
The MEC2 contains a radio receiver that, under normal reception conditions,
constantly monitors and corrects the programming unit time switch.
Reception of the radio clock signal is indicated by symbol on the display.
Setting the date
Hold "Weekday" down, and select the required date with the rotary selector
(here: "20").
The name of the day automatically changes (here: "Monday") if you set the
date
for the day using the rotary selector (here: "20").
Release "Weekday" to save your input.
Press "Weekday" again to enter the month.
Press "Weekday" again to enter the year.
The respectively flashing item can be modified with the rotary selector.
Setting the time
Hold down "Time", and select the required time with the rotary selector.
The time is set in one-minute steps.
Release "Time" to save your input.
USER NOTE
Date and time are preset at the factory. This function is backed up by battery
power independent of the mains power supply.
AUT
/
USER NOTE
We recommend leaving the radio clock receiver disabled outside Germany to
prevent the reception of false signals (incorrect time setting).
+
Set date
Monday
20.08.2001
+
Set time
15:52:58

Buderus Logamatic 4323 Specifications

General

Brand	Buderus
Model	Logamatic 4323
Category	Control Unit
Language	English