Buderus Logamatic 4323 - Selecting a Heating Circuit

Extended functions
7
Logamatic 4323 - Subject to technical modifications.
31
7.6 Selecting a heating circuit
Your heating system may be equipped with several heating circuits. If you want
to change a setting – e.g. the heating program – first select the heating circuit
in
which you want to change the setting.
Subject to the equipment level of your heating system, the following heating
circuits can be selected:
– MEC2 heating circuits (all heating circuits assigned to the MEC2,
Æ
Chapter 7.8)
– Heating circuit 0 – 8
– DHW
– DHW circulation
z Open flap.
Hold down the "Heating circuit" key, and select the required heating circuit with
the rotary selector (here: "Heating circ. 2").
Release the "Heating circuit" key. The displayed heating circuit is now selected.
As soon as heating circuit has been selected, the display returns to the
permanent display.
AUT
+
Heat. circ. sel.
Heating circ. 2