Standard functions
6
Logamatic 4323 - Subject to technical modifications.
19
6.3 Selecting the operating mode
You may operate the MEC2 programming unit in two ways:
– in automatic mode
– in manual mode
Automatic mode
Generally, homes are heated less at night than during the day. With the MEC2
programming unit you don't need to adjust the thermostatic radiator valves
before bedtime or in the morning. The automatic changeover of the MEC2
programming unit will do that for you. It changes over between the day mode
(standard mode) and the night mode (setback mode).
The times at which the heating system changes from day mode to night mode –
and vice-versa – are factory-set via standard programs (Æ
Chapter 7.10).
However, you or your installer can modify these settings (Æ Chapter 7.12).
Manual mode
For example, if you want to heat longer late in the evening or not quite as early
in the morning, you can set the day and night mode manually (Æ
Chapter 6.3.2).
You can also use manual mode to heat on cooler days when the system is
operating in summer mode.
Tag Zeit Temp
Urlaub Auswahl So/Wi
Anzeige Heizkreis Zurück
AUT
To Next Page
Loading...
Need help?
General
