Extended functions
7
Logamatic 4323 - Subject to technical modifications.
35
7.9 Selecting and modifying a heating program
7.9.1 What is a heating program?
A heating program provides the automatic changeover of operating mode
(day
and night mode) at fixed times. This automatic changeover is effected
via
a time switch.
Before you utilise this option, consider the following:
– At what time in the morning should your home be warm? Is this time
dependant on the day of the week?
– Are there days when heating is not required during the day?
– From what time in the evenings do you no longer need to heat? This may also
depend on the day of the week.
The length of time your heating system takes to heat up individual rooms may
vary. This will be subject to the outside temperature, the building insulation and
the room temperature setback.
The "Optimisation" function of the programming unit calculates the various heat-
up times. Ask your installer whether this function has been activated. If so, all
you need to do is enter the times at which your home should be warm.
With the programming unit, Buderus offers eight different, preset heating
programs as standard programs.
Fig. 12 Example for a standard program (here: "Family program" from Monday to
Thursday)
1 Day mode
2 Night mode
USER NOTE
After commissioning, check whether the selected heating program suits your
lifestyle. If not, several options are available for matching the heating program
to your individual requirements.
To Next Page
Loading...
Need help?
General
