Buderus Logamatic 4323 User Manual

Extended functions
7
Logamatic 4323 - Subject to technical modifications.
33
Press and hold down "Temperature". Initially the heating circuit will be displayed
for which you want to adjust the temperature. After approximately two seconds,
the display will show the currently selected temperature and the operating mode.
Adjust the temperature with the rotary selector (here: "21°C") for the heating
circuit.
Release the key to save your input.
The day room temperature is now adjusted to 21 °C. The selected permanent
display will then appear again.
+
Set room
Automatic day
21°C
USER NOTE
If you want the adjust the temperature for an operating mode that is not
the
current mode, first select the corresponding operating mode (e.g. with
the
"Night mode" key). After you have modified the temperature,
reset
the operating mode to the previous setting.
USER NOTE
For heating circuits with individual remote control units (e.g. BFU),
you
can adjust the room temperature only via this remote control
(Æ
see the instructions for that remote control unit).

Buderus Logamatic 4323 Specifications

General

Brand	Buderus
Model	Logamatic 4323
Category	Control Unit
Language	English