1.
Finding
a
PTY
Station
To select and find a desired PTY perform the following:
Press P-TYP. The PTY symbol will be displayed
2.
3.
4.
5.
on the screen.
Select a category by turning the AUDIO knob.
Once the desired category is displayed, press either
SEEK arrow to select the category and take you to
the category’s first station.
If you want to go to another station within that
category and the category
is
displayed, press
either SEEK arrow once.
If
the category is not
displayed, press either SEEK arrow twice to display
the category and then to
go
to another station.
If PTY times out and is no longer on the display, go
back to Step
1.
SCAN:
You can also scan through the channels within
a category by performing the following:
1.
Press P-TYP. The PTY symbol will be displayed on
the screen.
2.
Select a category by turning the AUDIO knob.
3.
Once the desired category is displayed, press and
hold either SEEK arrow, and the radio will begin
scanning within your chosen category.
4.
Press and hold either SEEK arrow again to stop at
a particular station.
BAND (Alternate Frequency):
Alternate frequency
allows the radio to switch to a stronger station with the
same program type. Press and hold BAND for two
seconds to turn alternate frequency on.
AF
ON
will appear on the display. The radio may switch to
stronaer stations. Press and hold BAND again for two
To use the PTY interrupt feature, press and hold the seconvds to turn alternate frequency
off.
AF
OFF
P-TYP button until you hear a beep on the PTY will appear on the display. The radio will not switch to
you want to interrupt with. An asterisk will appear next other stations. When you turn the ignition
off
and then on
to
the
PTY name (for example CLASSICAL*). When you again, the alternate frequency feature will automatically
are listening to a
CD,
the last selected RDS station be turned on.
will interrupt play
if
that selected PTY format is
broadcast.
3-73
To Next Page
Loading...
Need help?
General
