Bunn SmartWAVE - Program Switches

SmartWAVE
®
Training Manual
10
Program Switches
There are 4 dip switches located on the control board that control optional
settings on the SmartWAVE
®
brewer. All of these switches are set to the OFF
position from the factory.
Switch # Function- Off position Function- On position
1 Program Lockout Programming allowed Programming locked out
2 Brew Lockout Brew at any temperature Only brews at Ready
temperature
3 Energy Save Energy save mode off Maintains 140° F after
6hours,Offafter26
hours
4 High Altitude Set tank temp. 200° F Set tank temp at 190° F
1 2 3 4
OFF
ON