7.4.1 RDS settings
encoding: rds/rbds (rbds for the US, rds for rest of world)
pi: enter local PI code.
ps: enter default PS.
stereo: off/on
dynamic pty: off/on
ta: off/on
tp: off/on
ms: music/speech
pty: default program type code.
ptyn: allows entry of more specific pty name.
rt: Radio Text.
af: allows entry of alternative frequency list.
7.5 Tuner module (optional)
This optional module allows the V3 transmitter to be used as a translator.
(If the tuner module is not fitted, this menu item is not available).
The high quality, digital tuner module features DSP processing of receive signals, to
ensure the highest quality reception, and best stereo reproduction – even during poor
signal conditions.
7.5.1 Tuner module menu
frequency: Set the receive frequency.
deemphasis: Set de-emphasis to suit your region, 50 or 75µS. For test and
measurement purposes, it’s also possible to select ‘off’.
channel eq: An adaptive filter to improve reception when multipath
interference is being encountered. On/Off.
mpath suppression: Reduced audibility of distortion caused by multipath
interference. On/off.
noise blanker: Detects and supresses noise pulses. On/off.
To Next Page
Loading...
