BWT Pearl Connect - Content of the Package; Installation Instructions; Selecting the Installation Site

CONSTRUCTION & REENOVATION 20 2022/12 - Indice de révision : D - Code : 32570
5. Content of the package
 BWT Pearl Connect
 Temperature sensor
 Stainless steel thermowell
 Fastening screws and bushings
6. Installation instructions
6.1. Selecting the installation site
6.1.1. Protection volumes
In accordance with the requirements set out in the standard NF C15-100 concerning safety distances to be
observed with respect to the pool, the electrical panel must be installed:
 Either outside volumes 0, 1 and 2 (see figures 1 to 3) ;
 Or in a closed plant room that is only accessible via a hatch or a door that may only be opened using a
key or a tool ;
Figure 4
Dimensions of volumes for pools and foot baths and permanent walls.
Note : volume dimensions are limited by permanent walls and partitions.
Figure 5
Volume dimensions for above-ground pools.
Note : volume dimensions are limited by permanent walls and partitions.