CONSTRUCTION & REENOVATION 27 2022/12 - Indice de révision : D - Code : 32570
9. Description of functions
9.1. Filtration
Auto mode: filtration management mode.
In Timer mode, filtration is managed by programming 3 operating windows per day, for each day of the
week.
In Temperature mode, the length of the filtration period is determined by the water temperature. The user
sets a start time at which the filtration pump starts operating and the water temperature is measured.
The length of the daily filtration period is then calculated based on this temperature.
Manual mode.
Timed mode (countdown).
Disallowed periods: used to define periods during which filtration is not allowed to run.
Variable speed pump: activate if a variable speed pump is installed. Auxiliaries 1 and 2 will be assigned
to the activation of speed 1 (auxiliary 1) and speed 2 (auxiliary 2).
White wire: speed 3 (not used)
Green wire: speed 2
Brown wire: speed 1
Red wire: stop
Black wire: common
9.2. Underwater lights
Setting the pool lighting operating hours.
Colour underwater light: used to manage the light colour changes.
CAUTION
If this option is active, there is a 30 second delay after the underwater light is de-energised before it can be
switched back on to avoid any unwanted colour changes.
To Next Page