BWT PERLA PRO XS - Packing; Technical Characteristics

Technical manual BWT PERLA PRO XS - code P0011650B - Rev 7 - 26/10/2021
23
PACKING
IMPORTANT : It is important to store the equipment after reception in a clean and dry room at an
ambient temperature of +5°C to +40 ° C, otherwise the ion exchange resin and some components of the
device will deteriorate.
Failure to comply with these conditions may result in forfeiture of the warranty on deteriorated items.
The BWT PERLA PRO XS Series devices are delivered:
pre-assembled and loaded with their ion exchange resin,
- with a salt container and its connection accessories,
- with a control box,
- with the hoses,
- with this technical manual.
TECHNICAL CHARACTERISTICS
Designation
Units
10
16
28
Volume of resin
liters
10
16
28
Exchange capacity
min.°m
3
40
64
112
max.°m
3
60
96
140
Salt consumption/regeneration
min. kg
1
1,6
2,6
max. kg
1,8
2,9
3,5
Salt tank autonomy
min.
17
34
26
max.
27
54
42
Water consumption per regeneration (at 4 bars)*
liters
70
112
196
First salt tank charge
in kg
40
135
120
Ground load
in kg
27
30
45
* Depending on the settings and the operating requirements related to the water to be treated and the
conditions of use
English