BYD Dolphin 2022 - Page 96

96 4-1 Charging/Discharging Instructions
Warm tip
 Do not forcibly insert the charging plug when the electric lock is locked.
 In the charging process, relevant charging parameters and charging animation
will be displayed on the combination instrument or multimedia system.
 In this condition, preset charging can be set through "Multimedia" →
“New energy” → “Charging setting” interface. Refer to setting procedure of
multimedia preset charging for details.
 During charging, predicted remaining time to full charge will be displayed on
the combination instrument or multimedia system. It is normal that the
predicted remaining time to full charge may vary to some extent with different
temperatures, power capacities and charging facilities.
 When the battery SOC is low, the preset charging function will not be
available.
3. Guidance on stopping charging
■ End charging:
 Charging will end automatically when the vehicle is fully charged;
 To end charging in advance, proceed to the next step.
■ Disconnect the charging port
connection:
 If the electric lock works in
the inactive anti-theft
mode, press the
mechanical button of the
charging plug directly, and
pull out the charging plug.
 If the electric lock works in the active anti-theft mode, press the
UNLOCK button on the key or press the microswitch on the door
handle (when the key is nearby), press the mechanical button of the
charging plug, and pull out the charging plug.
Warm tip
 Unlock the vehicle by pressing unlock button on the key (for charging in the
OFF mode) or press the microswitch on the door handle (when the key is
nearby).
 In the anti-theft working mode, unlock the vehicle to unlock the electric lock of
the charging port before pulling out the charging plug, and pull out the
charging plug within 30s; otherwise, the electric lock of the charging port will
be locked again.